Na zahtev našeg saradnika, uspešne internacionalne kompanije SAIPEM, koja radi na izvođenju radova na magistralnom gasovodu „Turski tok“, Energo-Sistem d.o.o. raspisuje konkurs za sledeća radna mesta u sektoru kontrole kvaliteta:

  • Civil QC Inspector
  • Coating, Painting QC Inspector
  • Welding QC Inspector
  • NDT QC Supervisor
  • Material QC Inspector
  • Pipe Tally

Pozivamo sve ambiciozne, stručne osobe da nam pošalju svoje radne biografije na office@energo-sistem.rs  ili da popune formular za prijavu za željeno radno mesto na našoj stranici zaposlenje. Nudimo Vam priliku za rad u dinamičnom okruženju i timu, profesionalno usavršavanje i mogućnost upotrebe najnovijih tehnologija.

Posebne napomene:

– rad se odvija na terenu (od Velike Plane do Zaječara)

– period angažovanja od 10 do 12 meseci

– svi kandidati će biti podvrgnuti testiranju  i proveri znanja od strane kompanije SAIPEM

Za više informacija i dodatna pitanja, budite slobodni da nas kontaktirate.

 

U nastavku sledi opis kvalifikacija koje kandidati moraju posedovati, kao i opis poslova za svako od navedenih radnih mesta:

Civil QC Inspector:

Required qualifications:

  • University degree
  • 5 years of experience in related area
  • Knowledge of civil works activities
  • Knowledge of Quality Control principles
  • Fluency in English

Main responsibilities:

  • In accordance with the Quality Control Plan, execute the specific inspections on material, equipment and construction/installation activities on site, following relevant specified procedures, issuing the relevant Quality Records
  • Issue the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports
  • Check the preparation of foundations
  • Check the correct preparation of reinforcements
  • Check the certifications regarding element mixes, LASTM test, chemical analysis, grain size analysis
  • Monitor atmospheric conditions during pouring operations
  • Monitor correct curing operations
  • Check the sampling operations (when required)
  • Review the laboratory examination results
  • Check compression strength test
  • Check materials quality (wire, fitting, etc.)
  • Verify special processes and the relevant workers qualifications
  • Check the conformity with the Quality Control Plan and obtain the relevant documentation
  • Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all civil works and testing related records are properly retrievable within the final As- Built dossier
  • In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection Test Plans, witnessing inspection and collecting relevant Quality Control records

Candidate’s profile:

  • Proactive, detail-minded
  • A cooperative person with good communication skills
  • Leadership skills
  • Strong planning and analytical skills

Coating, Painting QC Inspector:

Required qualifications:

  • Relevant College degree
  • Minimum 2 years of relevant working experience
  • Fluency in English

Main responsibilities:

  • In accordance with the Quality Control Plan, execute the specific inspections on material, equipment and construction/installation activities on site, following relevant specified procedures, issuing the relevant Quality Records
  • Issue the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports
  • Verify/control the correct storage and certification of material and instrumentation calibration ce rtificates
  • Witness/perform qualifications of coating processes
  • Check surface preparation
  • Check and record atmospheric conditions prior to starting of painting operations
  • Carry out wet and dry film thickness checks
  • Monitor observations of the correct coding cycles
  • Verify the correct color-coding and painting
  • Perform visuals inspections
  • Perform adhesion testing
  • Perform penetration testing
  • Evaluate impact testing
  • Perform visual checks after blasting
  • Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all mechanical and testing related records are properly retrievable within the final As- Built dossier
  •  In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection Test Plans, witnessing inspection and collecting relevant Quality Control records

Welding QC Inspector:

Required qualifications:

  • University degree
  • 5 years of experience in related area
  • Knowledge of welding works activities
  • Knowledge of Quality Control principles
  • Fluency in English

Main responsibilities:

  • In accordance with the Quality Control Plans, execute the specific inspections on materials, equipment and construction/installation activities on site issuing the relevant Quality Records
  • Verify welding parameters and consuma bles during operations
  • Be aware of welding procedures and qualification
  • Check welders qualifications
  • Check the availability and suitability of the welding equipment consumables, pre-heating, welding, heat treatment, bevels, the extent of the repairs made by the various welders (taking any corrective action required), the heat treatment record diagrams
  • Ensure that all welding, heat treatment and any hardness testing are in compliance with the relevant codes and specifications
  • Perform pipes line up check, ensuring that all installed pipe/fittings are compliant to the correct specification and that the material is in accordance with the specified material traceability requirements
  • Carry out visual inspections and issues relevant reports
  • Orderly collect and manage/check documents certifying tests, controls and inspections documents, ensuring that all welding and testing related records are properly retrievable within the final As Built dossier
  • In case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/Inspection Test Plans, witnessing inspection and collecting relevant

NDT QC Supervisor:

Required qualifications:

  • Relevant College degree
  • Minimum 2 years of relevant working experience
  • Fluency in English

Main responsibilities:

  • Check Quality Control Plans with reference to NDT activities
  • Check the availability and adequacy of consumables and equipment / instrumentation used for NDT execution and control
  • Verify that material and equipment are correctly received, stored, pr eserved, calibrated, handled, identified and traceable
  • Support and check the evaluation of the qualification of inspection personnel in charge of works, verify work procedures, including those relating to special processes
  • Support the definition of Q C Information System rules
  • Supervise and witness inspections, check reports and documentation issued by inspectors and verify the collection of the required Quality Records
  • Verify that tests, controls and inspections are carried out according to Quality Control Plans / Inspection Test Plans, checking the collection of relevant documentation also for the mechanical completion approval, and that personnel have access to all required project documentation
  • In case of subcontracted activities, verify the correct implementation of approved Quality Control Plans / Inspection Test
  • Plans, witnessing inspections and collecting relevant Quality Control Records
  • Verify the collection and management of documents certifying test, controls and inspections, checking that all records are properly retrievable within the final As-Built dossier
  • Verify the preparation of the Quality works dossier for final handover to the Document Controller
  • Verify that the NCR management process is in place and effective

Material QC Inspector:

Required qualifications:

  • University degree
  • 5 years of experience in related area
  • Knowledge of construction and installation processes
  • Knowledge of Quality Control principles, supervision topics and functions
  • Fluency in English

Main responsibilities:

  • In accordance with the Quality Control Plan, execute the specific inspections on material, equipment and construction/installation activities on site, following relevant specified procedures, issuing the relevant Quality Records
  • Verify that the supply is in compliance with the Purchase Order and Project Specifications (visual and dimensional control)
  • Check that material and equipment are correctly received, stored, preserved and handled
  • Check that materials are correctly identified and traceable
  • Carry out the visual checks on the materials delivered to the operating site, verifying the integrity of the supply and the correct marking of the items
  • Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all material and testing related records are properly retrievable within the final As- Built dossier
  • Issue the relevant Inspection Material Reports and/or Receiving Inspection Reports, Non Conformity Reports
  • In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection Test Plans, witnessing material inspection and collecting relevant Quality Control records

Candidate’s profile:

  • Responsible, precise and analytical person
  • Cooperative and team-oriented
  • Well organized and flexible approach
  • Capable to meet deadlines and deliver results

Pipe Tally:

Required qualifications:

  • Relevant College degree
  • Minimum 2 years of relevant working experience
  • Fluency in English

Main responsibilities:

  • Verify that correct hardware availability, set up, and functional status before offshore operations start up
  • Ensure that prior to offshore operations start up ensure that applicable soft PTS Data Input has been duly cleared wi thin barge/Vessel PTS infrastructures, and that all existing records are approved by involved parties
  • Operate PTS during offshore operations within Corporate and Project Applicable Guidelines
  • Identify Non-Conforming Pipes and ensure correct segregation actions as well as rejection as applicable
  • Collect QC Inspection Records information/results to be entered into PTS in line with applicable Project PTS Procedure
  • Prepare PTS Print out records, ensure correct data input has been cleared and in order to make relevant records available for Client approval as per established frequency
  • Ensure that Surplus/Damaged/Rejected Pipes Return activities is carried out within schedule procedures/work instructions
  • Ensure correct pipes reconciliation figures as per above scheme